Tools

chetbrz · January 03, 2009, 08:30:07 PM

Quote from: Bill Davis on January 03, 2009, 11:58:42 AM
Chet,

I did a search on this subject on this site and Jim Benjaminson posted
back in March, 2008, the following:

"DVD sets are priced at $39.95 plus $1.50 postage in USA, $2 postage to Canada and
$3 postage overseas.? Order from (checks payable to) Plymouth Owners Club, Inc.,
PO Box 416, Cavalier, North Dakota? 58220-0416."

Thanks Bill

Bill Davis · January 03, 2009, 11:58:42 AM

Chet,

I did a search on this subject on this site and Jim Benjaminson posted
back in March, 2008, the following:

"DVD sets are priced at $39.95 plus $1.50 postage in USA, $2 postage to Canada and
$3 postage overseas. Order from (checks payable to) Plymouth Owners Club, Inc.,
PO Box 416, Cavalier, North Dakota 58220-0416."

Ping · December 31, 2008, 08:49:10 PM

Bob, If I were back in Maine, I could send a picture of the tool that I have that have the DCPC stamped on it. As if is, you will have to wait until spring from this ole fellow. :) Have a good evening. Ping

chetbrz · December 31, 2008, 07:04:30 PM

Quote from: Jim Benjaminson on December 31, 2008, 06:35:56 PM
A complete history of Plymouth logos/emblems appeared in Plymouth Bulletin # 212? May-June 1995.? Its available on the DVD set of the "First 48 Years of the Bulletin".

Jim,

How can one purchase this CD ?

Chet...

Jim Benjaminson · December 31, 2008, 06:35:56 PM

A complete history of Plymouth logos/emblems appeared in Plymouth Bulletin # 212 May-June 1995. Its available on the DVD set of the "First 48 Years of the Bulletin".

Carmen · December 31, 2008, 10:24:54 AM

Just for FYI I have a 1954 Dodge M37 Military 3/4 truck all of those bolt heads are also stamped DDPC, when I did my truck I tried to save as many of those old bolts as possible.

Carmen

Dennis Hemingway · December 31, 2008, 10:23:11 AM

This is from the Allpar web site.
Dennis

http://www.allpar.com/history/logos.html

elmo · December 31, 2008, 04:25:53 AM

Bob the DDCP stands for Dodge,DeSoto , Chrysler, Plymouth . most parts on the Chrysler family cars had that on them , if nobody posts a photo , just a suggestion remove your taillight lens the DDCP will be on that on the inside of the lens. i do have a original leather tool bag from a 1937 Plymouth with a couple of tools in it but there is nothing on them , so i don't know if they are original tools , although they seem to fit in the bag properley in the spaces provided

Bob · December 30, 2008, 08:14:18 PM

Chet,
The roads were dry yesterday, so my wife and I, along with Cooper our dog, went for about a three mile ride in the Plymouth. The sun was out for the first time in a long time, no freezing rain or snow since a couple of days ago. We are suppose to get between 3-5 inches of snow tomorrow, so yes, now the Plymouth is tucked away in the garage again. Once the roads are dry again, I will take the old girl out again. Now that I am almost 61, I figure the Plymouth will outlast me, so I might just as well enjoy it as much as possible, whenever possible:):)

That was a good photo of you and your family on the cruise.

Happy New Year to you and yours from the frigid Catskills of NY,
Bob

chetbrz · December 30, 2008, 07:38:32 PM

Hay Bob,

I don't have the answer to your question but just wanted to say Happy New Year.? You must have gotton a fair amount of snow.? Is your car tucked away for the winter or do you have a vintage set of chains.

Chet...

Bob · December 30, 2008, 06:58:50 PM

I am under the understanding that the tools that came with the older Plymouths, or for that matter all the Chrysler vehicles had a D,
D,C and P stamped on them. Does anyone have a photo that they can post so I know what I am looking for?

Happy New Year,
Bob