1936 P2 Help

Started by CG sailor, May 29, 2008, 08:24:27 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

CG sailor

Thanks for the pictures. That will help. I think that if I take a pic of the thottle pieces that I have, that would be better. I believe that I am missing the curved brackets that attach to the firewall. As for the wiring, I may be able to get it completed this weekend. Can anyone tell me if the Plymouths came with fog lights? I have a switch and it looks period correct. If so were would that attach at to the dash? Thanks
  •  

36ply4dr

Here are the pics I promised

First one is the back of the instrument cluster

Here is the harness as it enters the firewall


this is the inside of the firewall




  •  

JimCno

#11
I don't know if this will help but here's a picture of the throttle linkage for my '35...


Follow this link to see a whole collection of pictures of working on my '35. Maybe some will help.

http://smg.photobucket.com/albums/v76/JImCno/
  •  

ParkBear

I'll get you some pics as soon as I can to show you the parts this week. Basically, there is a pair of brackets that mount to the firewall. The brackets are 2 pieces of flat steel with a curve at the end. The linkage is u shaped and clamps in the u part of the flat steel which is clamped to the firewall. You will see what I am talking about when I send you the pics. I can't speak for the throttle pedal to the linkage as I am not there yet on my restore.
Mike
1936 plymouth P2
Currently Being Rebuilt after being in pieces for 18 years
  •  

CG sailor

ParkBear and Tod
I have the bracket on the manifold for now. I need to figure out the bottom linkage as it connects to the bar that goes behind the head. I may be missing one or two pieces. Sorry for the lack of words from trying to describe it. I also will be running the cables through the fire wall and need to figure that mess out. It probable would be best if i took a picture of my firewall. I really wish there was an assembly manual. That would save a lot of time. Thanks
  •  

ParkBear

Yep, that is the same. The only item I am not sure about is the spring. I'll check tonight when I get home for the bracket. Off of memory, I don't remember seeing the bracket but that doesn't mean that I am missing it. I got my assemby off of car at hidden valley junkyard. My car was disassembled years ago but I have been researching this for some time and all the photos appear to have this same type of installation.
Mike
1936 plymouth P2
Currently Being Rebuilt after being in pieces for 18 years
  •  

TodFitch

Quote from: ParkBear on June 02, 2008, 01:33:17 PM
The throttle linkage on the passenger side connects to a bracket on the exhaust. There is another bracket that interlocks with that bracket that connects to the throttle body linkage. Mind is apart so I don't have pictures. I am close to installing this piece and will take pictures if you still need them when I it installed on the car unless you want pictures of the brackets on the table. Let me know.

So is the 1936 P2 similar to the older PD with a bracket on the intake manifold as seen in this photo or is it like the later cars with the linkage going across the head? (I don't think the return spring should go to the bottom of the manifold like this picture shows but am not really sure.)

  •  

ParkBear

The throttle linkage on the passenger side connects to a bracket on the exhaust. There is another bracket that interlocks with that bracket that connects to the throttle body linkage. Mind is apart so I don't have pictures. I am close to installing this piece and will take pictures if you still need them when I it installed on the car unless you want pictures of the brackets on the table. Let me know.
Mike
1936 plymouth P2
Currently Being Rebuilt after being in pieces for 18 years
  •  

CG sailor


Thanks for the info. I am also scrtching my head with the throttle support bar. I just need to see how it hooks up from the carb to the horizontal bar. Thanks
  •  

36ply4dr

I just looked at it, the harness enters the firewall near the top on the drivers side. It's roughly the same height as the back of the instrument cluster. There is a metal bezel that covers the hole and has a screw on either side.  I take back what I said about it being all original. The engine was replaced with a dodge 6cyl D24 at some point.  How this may have affected the wiring I don't know.  I took pictures of both the outside firewall and the inside. Unfortunately the digital camera connecting cord is at work. It'll be a few days before I can get the pics uploaded.   On the inside of the firewall it's a mess.  It comes out of that harness into loose wires connecting to the back of the original instrument cluster.

From the outside of the firewall it runs down to a connecting clip halfway down the firewall, then to the drivers side frame.

Hope this info helps.
  •  

CG sailor

That would be great. I have an older but new wiring harness (NOS) and have spent the last couple nights changing all the sockets over to the new harness from the old. I just dont have a clue were it enters the fire wall. I am also trying to get the throttle figured out. Thats why I was hoping for some pictures. Thanks foryou responce.
  •  

36ply4dr

We'll I've got a complete original 36 P1 four door. I have no idea how similar the wiring is but I'd be happy to get you photos of any area that you need. 
  •  

CG sailor

 Just wanted to post my first post on this site and ask if anyone can help with my project. I have 36 P2 (2 door) deluxe, black Ext. light green (I think) Int. and I bought it in pieces. I have been slowly getting it back together and am having trouble guessing what parts are what. I have most everything and then some with the car. I also have a parts manuel ( Originally Nov. 1935), The O.K tag for the front sail emblem, The original tire warrenty, and various other forms of documentaion. I also have a service manual that is very limited on stuff for a 36. I am keeping the car original despite listening to everyone I know, wanting me to street rod it. Yes it would be fun to strret rod this car but, its to close to original to do that. I could really use some pictures of the wiring because the wiring diagram is not enough. Anyway thanks for listening.
  •