PB Blaster and Kroil-?

[JimCno]

I've bought PB Blaster at the hardware store, I haven't seen Kroil sold anywhere.

The other option is to use a nut buster or cut it off with a cutting wheel on a Dremel tool, then replace with new bolts.

[martyb]

I've been impressed by Kroil.  When I first tried to remove the mounting bolts on the bumpers of my 47 Plymouth, they didn't even move.  I then took a can of AeroKroil and soaked all of them and left them overnight.  The next morning all of the nuts came off with little effort.  Very good stuff!

Marty

[samiam0821]

I have only used BP Blaster, so I can only comment on it, but it sure did a great job of restoring my rubber sill mats. See my other recent post. I have pictures of before and after. Camille

[Jim Yergin]

I buy PB Blaster at my local auto parts store. You can order Kroil at this web site:

http://www.kanolabs.com/

Jim Yergin

[Carmen]

For me Kroil is the best by far. I have use it on both my Jeep and truck and will be using it for the Plymouth.

Carmen

[DENNIS P NOLAN]

I am looking to get some rusted bolts off an exhaust manifold-I have the replacement manifold and am looking for the products suggested- Kroil and PB Blaster-?..the best place to get them-?..Thank you!!! Dennis