How to remove gas tank plug on a 47 and Sta-Bil gas stabilizer

Started by 47SpcDlx, February 17, 2007, 04:02:17 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

52dodge

Steve, Your right, it is a 1/2 inch ratchet.  I should remember that. I drained my Dodge only a month ago.
  •  

47SpcDlx

Mark,

Thanks for the reply. Duh, to look at the plug it almost looks like a torx fitting but a 1/2 inch rachet with an extention loosened it easily. 

I have been looking for a gas tank for years.  They are hard to come by.

Thanks again,

Steve

  •  

52dodge

i HAVEN'T OWED A P-15 IN SOME YEARS BUT MY 52 DODGE PICK-UP TAKES A 3/4 RATCHET OR BREAKER JUST FINE.  Stabil will break down over time.  I don't take the discoloration of your gas as a good sign.  I would drain it if the car is going to sit.  Be sure to have plenty of ventilation an turn off anything that may cause sparks.
  •  

47SpcDlx

I think I want to drain some 2 year old gas from my 47 and would like to know what tool can be used to remove the plug.

I put Stabil in the tank the last time I used the car (about two years ago) but the Stabil directions state the it keeps fuel fresh for up to twelve months.  My fuel looks a little like varnish.

Do you think I'm OK with the gas I have in the car?

Thanks,

Steve
  •