regarding 1932 4 Cyl Plymouth

[TodFitch]

I ended up going to napa twice to find a belt . I did find one that was close and would work, at a cost of $30 + I than went to a farm dealer, Case,Bob Cat, etc., Found a greenstripe belt to fit exact at a cost of $10

Care to list a brand and part number? I could then add it to my parts database at https://www.ply33.com/Parts/numeric. It might make it easier for the next person.

[Harlan Olson]

I ended up going to napa twice to find a belt . I did find one that was close and would work, at a cost of $30 + I than went to a farm dealer, Case,Bob Cat, etc., Found a greenstripe belt to fit exact at a cost of $10

[Bill Davis]

I just looked in NAPA's on-line catalog and they list belt #2524465 as an exact fit for
a 1932 PA or PB (196 cu. in. 4 engine). 

[31plymouth]

I have a gates Green stripe belt  # 686 on my 31.   The 32 should use the same belt.

[GWR]

Went out to see if my fan belt still had a number on it, (30U 4 cyl) but no such luck. I am sure I got it from NAPA Auto Parts.

Happy motoring, Gary R.

[Bill Davis]

Harlan,
It just occurred to me today while I was "ambling through" a home/farm store and looking through their
automotive/trailer/farm mechanical sections that all you need to do is take the measurements of the
belt you need (length, width & pitch) to a Tractor Supply store or a tractor dealer/tractor parts store or
something similar and match up what you need with what they have.  I seem to remember that I think
your car uses a wide fan belt.  I would wager that one of these places will have what you need.  Also,
if you live near a large city, an industrial supply store or an electric motor supply/re-builder might have it too.

Good luck with your search.  Let us know what you find. 

[TodFitch]

Unfortunately I don't have that one in my database. If/when you do find one that fits can you let me know so I can add it to my information?

Thanks!

[Harlan Olson]

Does anyone have a current number (one that parts store personnel would recognize) for the fan belt for a 1932 4 cylinder Plymouth motor? 

Thanks, 
Harlan Olson