Source for radiators for U 1929 model

CHALTEN · December 13, 2007, 09:25:55 PM

Hello all,
thank you for your info. just got back home from TX. will let you all know my findings.
best,

martin

WRSW32A · December 13, 2007, 09:01:57 PM

Martin,

Let me know if my lead was helpful. I hope that they are responsive. Also hope that I have been of help. This DISCUSSION BOARD has been of great help to me.

Bert,

TodFitch · December 10, 2007, 05:33:02 PM

Quote from: WRSW32A on December 10, 2007, 02:34:33 PM
Martin,

If Dennis was not able to help you. Please try the following:
? ? ? ? ? ? ? ? ? ?Universal Carnegie Mfg
? ? ? ? ? ? ? ? ? ?70 B Barch St
? ? ? ? ? ? ? ? ? ?Carnegie, Pa. 15106
? ? ? ? ? ? ? ? ? ?1 800 867 9554

Specializing in Antique Radiators and Heater Core.

I hope that they will be of help to you.

Bert,

That looks like a good source that I had not heard of before. And they have a web site:

http://www.universalcarnegiemanufacturing.com/index.html

WRSW32A · December 10, 2007, 02:34:33 PM

Martin,

If Dennis was not able to help you. Please try the following:

? ? ? ? ? ? ? ? ? ?Universal Carnegie Mfg

? ? ? ? ? ? ? ? ? ?70 B Barch St

? ? ? ? ? ? ? ? ? ?Carnegie, Pa. 15106

? ? ? ? ? ? ? ? ? ?1 800 867 9554

Specializing in Antique Radiators and Heater Core.

I hope that they will be of help to you.

Bert,

DENNISKS · December 03, 2007, 09:37:20 AM

Martin

I have six radiators for my 28. If these are the same as yours I would be willing to sell you one. Please write me at Plymouth 1928 4DR @AOL.COM

Dennis

Wm Steed · November 30, 2007, 07:39:10 PM

In response to your radiator problem....
There are several company's here in the States that make and/or remake radiators for antique cars/trucks. One company in particular... BRASSWORKS (

sales[delete this bit 6ae138215e1af][insert an at symbol here]thebrassworks[insert a dot here]net

) 805 544-8841..They are located in San Louis Obispo, CA.. They specializes in Ford Model T/A brass radiators, they also advertise that they do Dodge Brothers radiators.

I have a friend that has a 1913 Ford Model T, his car is a 99 + point car, he recently won first place trophies in two Model T shows. The radiator in his car was built by BrassWorrks. He is a perfectionist to the maxxxxxx. Perfect is not good enough for him.

On the wood problem.... I would suggest that you contact.... Patrick Dolan...

pmdolan[delete this bit 6ae138215de70][insert an at symbol here]hotmail[insert a dot here]com

. Patrick is very knowledgeable on the '28/31 Plym's. In October I transported an almost complete set of wood for a '28/29 Plym to Patrick.. I am sure he would have patterns which you could use to identify you parts.
When you contact Patrick, mention that I suggested you get in touch with him....Bill

Sebastiano · November 30, 2007, 03:00:41 PM

Hi Martin,
I'm sure you can find somebody that can rebuild some parts.
Here, in Italy some guy do it.
Look around I'm sure that you will be bale to find...
Let me know, my is working now..
Sebastiano

CHALTEN · November 27, 2007, 07:28:58 PM

Hello everyone,
My restoration is going nowhere. The carpenter/ebanist who was re-making of the wooden parts, got brain damage. Yesterday I went to his garage to try to figure out where and what was mine. It will be rather difficult to start again.
Meanwhile, I was having the radiator repaired, but apparently it is not possible. Down here I can only get similar ones to Ford As, but nothing like Plys. Does anyone know a source for such in the US? or really NOS for sale? not a used one in good condition.

let me know.
best
martin from Buenos Aires, Argentina