Dome Light Switch Plate for 40 Plymouth

40Coupe · May 22, 2011, 08:18:16 PM

I just posted a pic on the General Discussion board.

RC Drown · May 20, 2011, 05:15:13 PM

Quote from: 40Coupe on May 20, 2011, 04:22:15 PM
Guys, thank you so much for all the help. I will be contacting Lindsay. Appreciate the great info on the stainless screws. As far as pics, the car has not progressed far enough for a decent pic but will put one up when I can get some time.

Not to worry about the condition of the car, all pictures are welcomed

40Coupe · May 20, 2011, 04:22:15 PM

Guys, thank you so much for all the help. I will be contacting Lindsay. Appreciate the great info on the stainless screws. As far as pics, the car has not progressed far enough for a decent pic but will put one up when I can get some time.

Lindsay McConnell · May 20, 2011, 08:59:09 AM

I have several in stock, but I believe they come with the switch too.
Let me know if you're still interested.

RC Drown · May 20, 2011, 07:44:06 AM

Check with Len at Deception Pass

Can you post some photos of your '40? Sure would be appreciated

elmo · May 20, 2011, 02:57:27 AM

if you want stainless screws . try a boat supplier

TodFitch · May 20, 2011, 12:26:06 AM

Can't help you on the dome light switch plate itself, but the 179390 screws are "Screw - Tapping, oval head, cross recess (Type A)" that are a #4 size with 24 threads/in, 1" long, nickel plated steel. "Cross recess" means Phillips head.

These are stainless steel rather than nickel plated steel but I bet most people would not notice the difference: http://www.jamestowndistributors.com/userportal/show_product.do?pid=1724&familyName=%234+Self+Tappers+OP

40Coupe · May 19, 2011, 09:27:05 PM

I am looking for the small switch plate cover that goes on the interior sidepost switch for the Dome Light. The part # is 770714 and the screw for it is #179390. Anyone out there have one or a lead on one?? Thanks much. Bob