Horn Wire

[Buddy Romines]

The only part of the wire that had some wear was at the point it came out of the steering tube, I put a foot of shrink tubing on it and it works fine.

Thank you..   Buddy...

[Lindsay McConnell]

I would try to salvage the original connector, down by the steering box too.

[TodFitch]

I have removed the steering box from my P10 and noticed the horn wire was a little on the soft side and was very flexible, also in only fair shape.

Is there anything special about this wire, would a standard 16 gauge wire work?

The horn draws quite a bit of current. I'd use 14 gauge rather than 16. Other than that, it is just a wire.

[Buddy Romines]

I have removed the steering box from my P10 and noticed the horn wire was a little on the soft side and was very flexable, also in only fair shape.

Is there anything special about this wire, would a standard 16 guage wire work?