46 plymouth door locks

[brianz]

Thanks - I found the screw - Allen Head - but couldn't get it to budge.  Didn't want to force anything if that wasn't the right place to be focusing my attention.  I guess some PB Blaster, and maybe a little heat will loosen up the threads. 

[John Hendricks]

Upon further reflection, that hole will be even with the lock cylinder on the outside of the door.

[John Hendricks]

Look on the inside frame of the door, just  below where the latch on the door meets the other oart of the latch on the body. there may be a small - 1/4" -hole.  Look inside with a small flashlite and see if u can see a small screw.  that screw has a point on the end u can't see that holds the lock cylinder.  Be careful and don't be in a hurry as the screw threads  may be rusted quite a bit.

[brianz]

I am getting ready to paint my 46 special deluxe coupe, and am having trouble removing the door locks.  Is there a secret to their removal?