window washer t

Started by virge55, August 21, 2008, 05:24:44 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

thomas russom

It may be possible to repair that outlet if there is enough surface so you can capture the outside. Make sure no sticky gets on the inside; the two piece ball valve must move freely inside. Otherwise email at . I found an NOS one in an incomplete Mopar Washer kit I :o purchased at The Jefferson Wisconsin Swap meet.
  •  

virge55

hi thanks but good old epoxy two part resin a 24hr wait and remembering to prime the darn thing and hey presto water !!thanks again guys
  •  

thomas russom

That is not a tee, it is a broken F valve and it does not function like a tee. The air is forced( pressured) into the bag or bottle connection with the foot pump and the fluid is squirted out the other connection. That leg going down has two separate routings,one in one out. Do not exclude the swap meet, Ebay or the salvage yard for your search. Many auto makers used this valve.
  •  

CG sailor

Virge 55
I believe you can purchas the T's at Auto Zone. I have seen them but they are white. Hope it helps.
  •  

virge55

can anyone tell me where I can get hold of this item or a usable alternative?  ???
  •