Floorboards

Started by donsm4, August 04, 2006, 06:28:06 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

donsm4

#3
August 04, 2006, 09:36:31 PM Last Edit: August 05, 2006, 08:18:11 PM by donsm4
No need for anyone to tear apart their car floors.? I measured my old rusty floor metal and found it was between .050 and .070 .? ?I don't know if rust increases the thickness of steel or decreases the thickness.? My books on metal has this as being around 16-18 gauge.  Thought an old assembly book might give the info.. Don
  •  

TodFitch

#2
August 04, 2006, 08:50:27 PM
On my PD two door sedan the sloped floor board is metal. I guess I could take things apart enough to measure how thick.

The flat section between the front seats and the sloped section is wood. Somewhere around 3/4 of an inch thick. I guess I could measure that if I open things up enough to measure the metal.

Maybe this weekend. . .
  •  

donsm4

#1
August 04, 2006, 06:28:06 PM
Does anyone know if the floorboards of a 33 Ply Coupe were made of 16 or 18 gauge steel?  Thanks Don
  •  
Print
Go Up Pages1
User actions