looking for tire mounting keepers

Started by alcopone, November 17, 2005, 01:08:15 AM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

30 Ply 30U

I did get repo handle protypes in. I was not happy with the detail, and this caster cannot improve it. I did however find a guy that casts in stainless with much finer detail that is very nice. I am on the road and do not have the info at the moment, but you can e-mail me and I'll forward the contact. They would then need to be chromed.
Patrick
30U Sedan X 3
30U convertiable coupe
50 p-19 Bus coupe
  •  

johnRFain29U

Did you get your new reproduction handles made yet? 
  •  

30 Ply 30U

If you have not found your keepers, I have a source from the Hershey show that I can dig out.
On the handles, I have a guy working on the molds for broze cast reproductions.

Patrick
Patrick
30U Sedan X 3
30U convertiable coupe
50 p-19 Bus coupe
  •  

johnRFain29U

Those window cranks and inside door handles are hard to come by - the pot metal they used was not made to last.? I ended up putting new Ford Model A handles and cranks in mine.

As for the keepers, you might try:

1) Ben Ostrander, Site 11 Box 52 RR 1, De Winton Alta Canada? TOL OXO (Check Hemmings for his phone number)?
2) Ray Ganser, Box 357, Provost, AB, Canada T0B-3S0; e-mail: ? (Not always in the best of condition, but he sends pictures.)

Good luck!
  •  

alcopone

Does anybody know where I can buy any tire mounting keepers for a 29' plymouth 4 door sedan, I also need to find inside window cranks and door handles, if anybody knows of anybody, let me know thanks!   Rob
  •