Started by DENNIS P NOLAN, February 07, 2024, 03:08:30 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.


Warm the car up to an idle speed.  Turn idle screw slowly clockwise until engine starts to falter, the turn same screw counterclockwise in engine starts to roll/surge from being too rich.  Turn screw clockwise again until you get the smoothest operation.


What should the mixture screw at the base of the carb be-out from seated 1 turn or more? less?
the car misses when the choke is wide open. seemingly runs ok when the choke is half closed-
Thank you ahead of time for your thoughts-

SMF spam blocked by CleanTalk