Carburetor

Started by DENNIS P NOLAN, February 07, 2024, 03:08:30 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Robert4

#2
Warm the car up to an idle speed.  Turn idle screw slowly clockwise until engine starts to falter, the turn same screw counterclockwise in engine starts to roll/surge from being too rich.  Turn screw clockwise again until you get the smoothest operation.
  •  

DENNIS P NOLAN

What should the mixture screw at the base of the carb be-out from seated 1 turn or more? less?
the car misses when the choke is wide open. seemingly runs ok when the choke is half closed-
Thank you ahead of time for your thoughts-
D
  •  

SMF spam blocked by CleanTalk