Author Topic: regarding 1932 4 Cyl Plymouth  (Read 177 times)

0 Members and 1 Guest are viewing this topic.

TodFitch

  • Full throttle user!
  • *****
  • Posts: 989
  • 1933 PD Two Door Sedan
    • Plymouth: The First Decade
Re: regarding 1932 4 Cyl Plymouth
« Reply #8 on: October 09, 2019, 08:24:39 PM »
I ended up going to napa twice to find a belt . I did find one that was close and would work, at a cost of $30 + I than went to a farm dealer, Case,Bob Cat, etc., Found a greenstripe belt to fit exact at a cost of $10

Care to list a brand and part number? I could then add it to my parts database at https://www.ply33.com/Parts/numeric. It might make it easier for the next person.

Harlan Olson

  • Starting line user!
  • **
  • Posts: 2
    • High Country Horse Drawn llc
Re: regarding 1932 4 Cyl Plymouth
« Reply #7 on: October 09, 2019, 12:02:27 PM »
I ended up going to napa twice to find a belt . I did find one that was close and would work, at a cost of $30 + I than went to a farm dealer, Case,Bob Cat, etc., Found a greenstripe belt to fit exact at a cost of $10

Bill Davis

  • Full throttle user!
  • *****
  • Posts: 312
Re: regarding 1932 4 Cyl Plymouth
« Reply #6 on: September 25, 2019, 12:09:24 AM »
I just looked in NAPA's on-line catalog and they list belt #2524465 as an exact fit for
a 1932 PA or PB (196 cu. in. 4 engine). 
-Bill Davis, Florence,AL
1951 Plymouth P-23 Cambridge 4 door

31plymouth

  • First Gear
  • ***
  • Posts: 7
Re: regarding 1932 4 Cyl Plymouth
« Reply #5 on: September 24, 2019, 12:39:46 PM »

I have a gates Green stripe belt  # 686 on my 31.   The 32 should use the same belt.

GWR

  • Proven posts ok.
  • Full throttle user!
  • **
  • Posts: 109
Re: regarding 1932 4 Cyl Plymouth
« Reply #4 on: August 20, 2019, 12:26:36 AM »
Went out to see if my fan belt still had a number on it, (30U 4 cyl) but no such luck. I am sure I got it from NAPA Auto Parts.

Happy motoring, Gary R.
GWR 30U Business Coupe
        67 Fury III 4drHT w/383

Bill Davis

  • Full throttle user!
  • *****
  • Posts: 312
Re: regarding 1932 4 Cyl Plymouth
« Reply #3 on: August 01, 2019, 03:56:02 PM »
Harlan,
It just occurred to me today while I was "ambling through" a home/farm store and looking through their
automotive/trailer/farm mechanical sections that all you need to do is take the measurements of the
belt you need (length, width & pitch) to a Tractor Supply store or a tractor dealer/tractor parts store or
something similar and match up what you need with what they have.  I seem to remember that I think
your car uses a wide fan belt.  I would wager that one of these places will have what you need.  Also,
if you live near a large city, an industrial supply store or an electric motor supply/re-builder might have it too.

Good luck with your search.  Let us know what you find. 
-Bill Davis, Florence,AL
1951 Plymouth P-23 Cambridge 4 door

TodFitch

  • Full throttle user!
  • *****
  • Posts: 989
  • 1933 PD Two Door Sedan
    • Plymouth: The First Decade
Re: regarding 1932 4 Cyl Plymouth
« Reply #2 on: July 31, 2019, 12:26:39 AM »
Unfortunately I don't have that one in my database. If/when you do find one that fits can you let me know so I can add it to my information?

Thanks!

Harlan Olson

  • Starting line user!
  • **
  • Posts: 2
    • High Country Horse Drawn llc
regarding 1932 4 Cyl Plymouth
« Reply #1 on: July 30, 2019, 11:10:38 PM »
Does anyone have a current number (one that parts store personnel would recognize) for the fan belt for a 1932 4 cylinder Plymouth motor? 

Thanks, 
Harlan Olson