I have a 39 P7 Business Coupe. It has the wiper arms that have hooks that fit into the hole in the motors. I've had the wiper arms on and off several times during a paint job and then again installing the glass. It seems that they are not as easy to install as they used to be. Once I do finally install them, there is very little spring tension and the wiper blades blow around when you are driving even at slow speeds. Am I missing something installing them? Or, have they just worn out from from removing them several times? They are very flimsy arms. I know Andy Bernbaum sells them so I was just going to get a couple, unless I'm not installing them correctly. Also, is there some other option that would work better than these?
Any info greatly appreciated!! Nick
Could be a worn spring or slightly bent arm. Those arms (and blades) are also available at the places that cater to Fords and Chevrolets as they all used Trico as a vendor.