Text only | Text with Images

Plymouth Owners Club

General Category => Technical Discussion => Topic started by: Tony D. on September 06, 2008, 11:43:33 PM

Title: wiring diagram: Chicago Auto Lamp 9000 TS switch
Post by: Tony D. on September 06, 2008, 11:43:33 PM
I'm trying to rewire a Chicago Auto Lamp brand # 9000 turn signal switch which was installed in a P19.  Some of the wires inside the switch housing are bare.  Does anyone have a wiring diagram for this switch?

Thanks,
Tony
Title: Re: wiring diagram: Chicago Auto Lamp 9000 TS switch
Post by: plym_46 on September 07, 2008, 10:51:11 AM
there are 2 schematics for signal wiring on the TAILLIGHTKING website.  One for 6 wire and one for 7 wire that should be close as I bleive all the aftermarket units used the same wire colors.

http://www.taillightking.com/images/A5007R%20Wiring.jpg
Title: Re: wiring diagram: Chicago Auto Lamp 9000 TS switch
Post by: Tony D. on September 09, 2008, 12:25:30 AM
You are right about the aftermarket wire colors, I rewired the switch and flasher socket this afternoon and it's ready for reassembly.
Thanks,
Tony
Text only | Text with Images