I am considering haveing The Antique Auto Cellar re-vulcanize the rear motor mounts for my 29 Pymouth. Has anyone had this done before?
The rubber in left side mount has swollen out the sides and is soft. However, the mount is still very tight and does not appear to have sagged any.
I think as part of the re-vulcanizing process the four rivets are cut that hold the two U-peices together. After the ruber is replaced, the owner has to bolt these to haves back together. When putting the mounts back together and installing the bell houseing and engine - are there any allignment issues thatmust be considered?
Any advise would be appreciated.
John
29U
Dothan, AL
John
They did my front mount on my 28Q. Did a great job and I highly recomend them for good quality.
Dennis