Text only | Text with Images

Plymouth Owners Club

General Category => Parts and Paper => Topic started by: jd2ksilver on November 17, 2005, 01:45:05 AM

Title: Heater Duct, 52 Plymouth with Model 503 heater control
Post by: jd2ksilver on November 17, 2005, 01:45:05 AM
Need the hard board, or fiber board heat duct running from the core in front to the firewall.? I have a lead on Ebay but it is used and damaged in one corner.? I have tried Old Plymouth's big step with no luck.

Any leads would be appreciated.
Title: Re: Heater Duct, 52 Plymouth with Model 503 heater control
Post by: mopardave on November 17, 2005, 08:31:02 AM
JD:  I may have a spare from a parts car I had.  I'll check.
Title: Re: Heater Duct, 52 Plymouth with Model 503 heater control
Post by: 53cranbrook on December 27, 2005, 01:24:42 AM
Tony C. in the Golden State Region is have ing them reproduced soon. His car is a 50 but I think he has the 503 heater too. You might want to contact him. I think you might find something posted on this forum somewhere.
Title: Re: Heater Duct, 52 Plymouth with Model 503 heater control
Post by: 52dodge on February 17, 2007, 05:52:30 PM
I was looking for some parts today and I thought I saw the part you are looking for.  Rodney Fowler (253- 862-2049) Has a large collection of heater parts from the late 40's to early 50's.  He calls his place the Mopar Morgue. 
Title: Re: Heater Duct, 52 Plymouth with Model 503 heater control
Post by: jd2ksilver on February 18, 2007, 12:13:36 AM
Hi all,,,,

I have since changed over to 12 volts, and added a Vintage Air AC/Heat unit.

I did purchase a sheetmetal duct from Tony C that did work great until I changed over.  If anyone wants heater parts (all working), including the duct give me a shout.

Thanks
Text only | Text with Images